PTI, Photon Technology International, The Fluorescence Solutions Company

 

or

 
   

The Fluorescence Solutions Company

 
 
Products  
   
 

QuantaMaster™ Series

QuantaMaster Phosphorescence

QuantaMaster™ 30 — Phosphorescence/Fluorescence Spectrofluorometer

The QuantaMaster™ 30 Phosphorescence/Fluorescence spectrofluorometer utilizes a pulsed xenon source for excitation, which allows not only spectral and kinetic fluorescence and phosphorescence measurements, but also the measurement of lifetimes greater than 1 µs. The QuantaMaster™ 30 has a detection limit of 50 femtomolar, a signal to noise ratio of 1,500 to 1 and a rep rate from 1 to 300 Hz!

Brochure
Brochure
Back to top.
QuantaMaster Phosphorescence

QuantaMaster™ 30 Plus — Phosphorescence/Fluorescence Spectrofluorometer

The QuantaMaster™ 30 Phosphorescence/Fluorescence spectrofluorometer utilizes a pulsed xenon source for excitation, which allows not only spectral and kinetic fluorescence and phosphorescence measurements, but also the measurement of lifetimes greater than 400 nanoseconds. The QuantaMaster™ 31 has a signal to noise ratio of 3,000 to 1 and a minimum measurable lifetime of 1 µs (with deconvolution)!

Back to top.

QuantaMaster™ 31 — Phosphorescence/Fluorescence Spectrofluorometer

The QuantaMaster™ 31 Phosphorescence/Fluorescence spectrofluorometer utilizes a pulsed Nitrogen pumped dye laser source for excitation. The QuantaMaster™ 31 has a minimum measurable lifetime of 1 µs (with deconvolution) and a data acquisition rate of up to 20 points/sec!

Back to top.
QuantaMaster 40 Steady State Spectrofluorometer

QuantaMaster™ 40 — Intensity Based Spectrofluorometer

The QuantaMaster™ 40 steady state spectrofluorometer is the most sensitive bench-top fluorometer on the market today. It’s signal to noise is 10,000:1 and with a 460 attomolar sensitivity, the QuantaMaster™ 40 allows even the most minute traces of fluorescent materials to be detected and identified in mixtures.

Brochure
Brochure
Back to top.
QuantaMaster NIR

QuantaMaster™ 50 — NIR with InGaAS Spectrofluorometer

The QuantaMaster™ 50 NIR steady state spectrofluorometer Is based on TE-cooled InGaAs detectors. The QuantaMaster™ 50 has a wavelength coverage from 500-1700 nm (optional up to 3200 nm) and a sensitivity of singlet oxygen generated by 1 µM Rose Bengal in MeOH.

Brochure
Brochure
Back to top.
QuantaMaster 60

QuantaMaster™ 60 — NIR with PMT Spectrofluorometer

The QuantaMaster™ 60 NIR steady state spectrofluorometer Is based on PMT detectors. The QuantaMaster™ 60 is available in four models for maximum spectral coverage and offers the potential for future fluorescence and phosphorescence lifetimes upgrades.

Brochure
Brochure
Back to top.
QuantaMaster Rapid Excitation

QuantaMaster™ 80 — Rapid Excitation Spectrofluorometer

The QuantaMaster™ 80 UV VIS Rapid Excitation is the latest high-speed multi-wavelength ratio fluorescence system from PTI. It incorporates our patented DeltaRAM X™ random access monochromator for into our standard steady state spectrofluorometer to allow for rapid ratiometric measurements. With the QuantaMaster™ 80 you can get up to 250 Ratios per second!

Brochure
Brochure
Back to top

TimeMaster™ Series

LaserStrobe

LaserStrobe™  TM-30 — Time-Resolved Spectrofluorometer

The LaserStrobe™ time-resolved fluorescence lifetime spectrofluorometer utilizes PTI’s pulsed nitrogen and dye lasers as an excitation source, which provides unsurpassed excitation wavelength coverage from 240 nm (frequency doubler option required) to 990 nm. The TM-30 uses PTI’s patented Stroboscopic Lifetime Technique, the simplest, fastest and the most direct way of measuring fluorescence lifetimes. PTI's LaserStrobe can measure lifetimes from 100 ps to 50 ms and decays of 7pM fluorescein.

Brochure
Brochure
Back to top
TimeMaster 200

TimeMaster™ LED TM-200 — Strobe Lifetime Spectrofluorometer

The TimeMaster™ TM-200 is an L-format cuvette-based lifetime spectrofluorometer capable of making fast and simple fluorescence lifetime measurements down to 100 picoseconds! With Wavelength coverage from 260 to 670 nm, the TM-200 spectrofluorometer is designed for the user who needs the most versatile and modular L-format system for the time-resolved fluorescence spectroscopy using a LED light source.

 
Brochure
Back to top
TM-5

TimeMaster™ Microscopy TM-50 — Microscope-Based Fluorescence Lifetime Spectrofluorometer

The TimeMaster™ microscope-based fluorescence lifetime spectrofluorometer utilizes PTI’s pulsed nitrogen and dye lasers as an excitation source, which provides unsurpassed excitation wavelength coverage from 240 nm (frequency doubler option required) to 990 nm. Very intense pulses make it ideal for weak samples, while the low repetition rate prevents photodecomposition. The TM-50 uses PTI’s specially designed photometer in conjunction with a patented fluorescence lifetime detection system.

 
Brochure
Back to top
PicoMaster

PicoMaster — TCSPC Lifetime Fluorometer

The PicoMaster is an L-format cuvette-based lifetime spectrofluorometer capable of making fast and simple fluorescence lifetime measurements down to 40 picoseconds (light source and detector dependent). The PicoMaster spectrofluorometer has LED wavelength coverage from 266 to 572 nm and Laser Diode coverage from 633 to 667 nm.

Brochure
Brochure
Back to top

RatioMaster™ Series

RatioMaster

RatioMaster™ — Fluorescence Microscopy

The RatioMaster™ is a microscope-based ratio spectrofluorometer for the collection and analysis of ratio-metric photometry data for calcium, pH, and intracellular ion and FRET! The RatioMaster™ can collect up to 1000 points per second and 250 ratios per second and has an adjustable band pass from 0 to 24 nm.

Brochure
Brochure
Back to top
RatioMaster SL200

RatioMaster™ SL200 — Fluorescence Microscopy

The RatioMaster™ SL-200 is a microscope-based ratio spectrofluorometer capable of single wavelength dynamic fluorescence measurements on a microsecond timescale. The ScopeLite 200 excels in providing a powerful illumination source for dyes in comparison with the DeltaRam™ as the ScopeLite is a metal Halide CW light source with a direct input to the microscope using a 2 m, 3 mm core liquid light guide.

Back to top

ImageMaster™ Series

OmHD

ImHD — High Definition Fluorescence Imaging System

PTI’s new EasyRatioPro HD Ratiometric Imaging platform has a dynamic range of 22,000:1. It streams 30–100 frames per second to disk at 5.5 megapixels per Image for a resolution of 2560 x 2160 pixels. This is 2.5 times higher resolution than Full HD television!

 
 
Back to top
EasyRatioPro

EasyRatioPro — Fluorescence Imaging System

The EasyRatioPro is fluorescence imaging perfect. The patented Warp Drive Imaging™ interface allows you to efficiently gather superb quality data allowing researchers to get control back into their research.

Brochure
Brochure
Back to top
EasyRatioPro SL 200

EasyRatioPro SL200 — Fluorescence Imaging System

This is the lowest cost imaging system in the EasyRatioPro family. It allows researchers to perform high speed, single wavelength fluorescence imaging experiments using dyes like Fluo4, DAPI, FITC, TexasRed and a multitude of single wavelength fluorescence probes. The illumination source (ScopeLite 200) is a 200 watt metal Halide continuous white light source.The ERP-SL200 system is also fully upgradable to the Patented PTI DeltaRam™X multiwavelength illuminator.

Back to top
EasyRatioPro

EasyRatioPro — with Photo Uncaging

The EasyRatioPro system with a Photo Uncaging Upgrade!

Back to top

Fluorescence Plate Reader

FluoDia PlateReader

FluoDia™ — Plate Reader

FluoDia T70 is a filter-based high temperature fluorescence microplate reader. It is an excellent platereader for people who want to measure fluorescence intensity. Measure 2.4 fmol fluorescein with up to 75 °C temperature control and 0–16,777,215 counts dynamic range.

 
Brochure
Back to top
 
Home  |  About Us  |  News  |  Events  |  Products  |  Applications  |  Brochures  |  Service  |  Careers  |  Contact Us